Cart 0

Power i-MIG 200

$ 0.00

Power and versatility top the list of features of the Power i-MIG 200.  The new digital IGBT inverter design of the i-MIG welder reduces the weight and footprint of the unit making it truly portable.  The dual voltage design allows the unit to be used about anywhere a receptacle is present.  This unit packs more features than any MIG welder in its class.  Dual digital displays feature both volt and amp readouts allowing the operator to make precise and repeatable adjustments to the parameters.   The stick function adds an extra dimension of versatility and performance when a MIG welder isn't needed or practical. The Arc force control manages the arc characteristics in both MIG and Stick modes.   In MIG mode, it controls current rise time, affecting  puddle fluidity, bead contour, and penetration.  In stick mode the arc force control behaves as a DIG control function and improves arc performance in short arc situations. Automatic Preflow and Postflow control improves weld quality during stops and starts helping to reduce porosity for high quality results. The new adjustable burn back control reduces trimming required so the wire is at the perfect length for each restart.  When you consider all these features and performance, the all new  Power i-MIG 200  is among the best you'll find in its class yielding professional level results.

Features & Benefits: 
  • Digital IGBT Inverter design offers stable, low spatter arc performance
  • Arc force control (Inductance) adjusts arc characteristics in both MIG and Stick modes
  • Capable of SMAW (Stick) welding when MIG conditions aren't ideal
  • Good duty cycle, higher than most competitor's ratings
  •  10 ft (3m) Series 15 MIG gun designed  with comfort in mind (Binzel/Trafimet compatable)
  • Eurostyle quick coupler allows easy aftermarket changeover to other MIG guns
  • Weld aluminum with optional Spool gun
  • Heavy duty cast aluminum wire feed assembly with positive gear driven rollers
  • Flux core capable with special order drive rolls
  • Over Current and duty cycle features both warning light and weld interrupt
  • Automatic Preflow and Postflow
  • Adjustable Burn back control
  • Truly portable "suitcase" size and light weight
  • Suitable for use with 5000 W "clean power" generators
     
  • Standard Equipment: 
    • Euro style quick connector
    • 10 ft. Series 15 MIG gun (Binzel/Trafimet compatable)
    • Ar/CO2 Regulator
    • Work clamp with cable
    • Spare consumable starter kit
    Optional Equipment: 
    • Welding cart
    • Consumable kit
    • 15 ft. MIG Gun cable
    • Spool gun with 25 ft cable
    Minimum/Maximum: 
    • Weld up to a maximum of 5/16" single pass weld* 240V
    • Weld up to a maximum of 1/2" multiple pass weld 240V
    • Weld a minimum of 24 gauge 120/240V
    • Weld with a maximum of 1/8" single pass weld 120V
    • Weld with a maximum of 1/4" multi-pass weld 120V

    *Single pass welds greater than 1/4" are not generally recommended as a sound welding technique with this size machine.

    Stick:

    • Weld with a minimum of 1/16" diameter electrode 120/240V
    • Weld with a maximum of 1/8-5/32" diameter electrode 240V
    • Weld with a maximum of 3/32 diameter electrode 120V

    This unit is not recommended for use with E6010. 

    Maximum electrode diameter is ultimately dependent upon rod type and electrode manufacturer recommendations.

    Type: 
    Analog IGBT Inverter
    Output /Process Type: 
    MIG, Stick
    Voltage/phase: 
    DUAL VOLTAGE 120/240 1 PHASE
    Max Rated MIG Amps: 
    • @120V:  125A
    • @240V:  200A
    Max Rated Stick Amps: 
    • @ 120V:  100A
    • @ 240V:  160A
    MIG Amps/Volts @ Rated Duty Cycle: 

    @120V

    • 125A/20.3V @ 35% Duty Cycle/40º C
    • 100A/ 19V @ 60% Duty Cycle/40 º C
    • 75A/17.8V @ 100% Duty Cycle/40º C

    @240V

    • 200A/24V @ 35% Duty Cycle/40º C
    • 160A/22V @ 60% Duty Cycle/40º C
    • 130A/20.5V @ 100% Duty Cycle/40º C
    Stick Amps/Volts @ Rated Duty Cycle: 

    120V:

    • 100A/24V @ 35% Duty Cycle/ 40º C
    • 80A/23.2V @ 60% Duty Cycle/ 40º C
    • 60A/22.4V @ 100% Duty Cycle/ 40º C

    240V:

    • 160A/26.4V @ 35% Duty Cycle/40º C
    • 130A/25.2V @ 60% Duty Cycle/40º C
    • 100A/24V @ 100% Duty Cycle/ 40º C
    Max Inrush ( I1MAX ) Amps: 
    • @110V:  33A
    • @220V:  36A
    Maximum Rated (I1EFF ) Input Amps: 
    • @110V:  20A
    • @220V:  22A
    OCV: 

    60V

    MIG Output Range: 
    • @ 120V:  30A-125A/15.5V-20.3V
    • @ 220V:  25A-200A/15.5V-24V
    Stick Output Range: 
    • @120V:  10A-100A/20.4V-24V
    • @240V:  10A-160A/20.4V-26.4V
    Variable MIG Inductance/Stick Arc Force Control: 
    Yes
    Spool Gun Capable: 
    Yes
    Pulse: 
    No
    Standard Drive Roll wire size: 
    .023”-.030”
    Separate wire feeder: 
    No, self contained
    Number of Drive rollers: 
    2
    Max Wire Feed Speed: 

    600 IPM

    Max Wire Roll Diameter: 
    8” (up to 12 lb)
    Weight: 35 lb
    Memory: 
    No
    Preflow time: 

    Automatic

    Post Flow Time: 

    Automatic

    Flux Core: 
    Yes, Optional
    Air Carbon Arc: 
    No
    2T/4T /Torch latch/Trigger: 
    No
    Other Features: 
    • Trafimet/Binzel compatable 15 series torch
    • Use 4" or 8" spools.
    • Digital Volt and Amp Meter

     



More from this collection